Show simple item record

dc.contributor.authorLawrence C. Bank
dc.contributor.authorT. Russell Gentry
dc.contributor.authorKenneth H. Nuss
dc.contributor.authorStephanie H. Hurd
dc.contributor.authorAnthony J. Lamanna
dc.contributor.authorStephen J. Duich
dc.contributor.authorBen Oh
dc.date.accessioned2017-05-08T21:30:23Z
dc.date.available2017-05-08T21:30:23Z
dc.date.copyrightAugust 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A3%28112%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54061
dc.description.abstractIn a recent research and development project a novel prototype pultruded composite structure was designed, fabricated, and tested. The bargelike, box-girder type structure measured approximately 24-ft long by 15-ft wide by 5-ft high (7.3 × 4.6 × 1.5 m). The structure was constructed from commercially available off-the-shelf pultruded structural profiles and panel sections. Tubular steel structural members and steel hardware were used to connect and join the different sections and subassemblies. The structure consisted of three 24-ft-long by 5-ft-wide by 5-ft-high (7.3 × 1.5 × 1.5 m) rectangular box-girder modular units and six 4-ft (1.2-m) wide modular deck panels. A design requirement was that the structure be capable of being transported by conventional, nonpermit trucking and be assembled at a remote site for subsequent testing. The structure was fabricated at a ship building and repair shop in Norfolk, Va., whose primary expertise was with conventional steel ship-structure fabrication methods and which had no prior experience with fabricating a large pultruded structural system. To fabricate and assemble the structure, a set of construction documents was produced. These included a set of written construction and assembly specifications, a set of detailed construction drawings, a detailed parts list, and a schedule. This case study details the construction process and provides a step-by-step explanation of how the engineering design team developed the construction documents for a relatively complex pultruded composite structure. Details of the design, analysis, and testing of the system are provided elsewhere.
dc.publisherAmerican Society of Civil Engineers
dc.titleConstruction of a Pultruded Composite Structure: Case Study
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:3(112)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record