Show simple item record

dc.contributor.authorJ. G. Teng
dc.contributor.authorL. Lam
dc.contributor.authorW. Chan
dc.contributor.authorJ. Wang
dc.date.accessioned2017-05-08T21:30:23Z
dc.date.available2017-05-08T21:30:23Z
dc.date.copyrightMay 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A2%2875%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54057
dc.description.abstractDespite many studies on beams and slabs strengthened using fiber-reinforced plastic (FRP) plates, no study has been reported on the strengthening of RC cantilever slabs (e.g., canopies and balconies) using FRP materials. This paper presents the results of an experimental study of the feasibility of strengthening deficient RC cantilever slabs by bonding glass FRP (GFRP) strips/sheets on the top surface (the tension side). As the key to the success of this strengthening method is a proper way of anchoring the GFRP strips into the supporting wall and the slab, the effectiveness of different anchorage systems was the focus of the experiments. Based on the test results, a simple and effective method is identified in which the GFRP strips are anchored into the walls through horizontal slots and onto the slab using fiber anchors.
dc.publisherAmerican Society of Civil Engineers
dc.titleRetrofitting of Deficient RC Cantilever Slabs Using GFRP Strips
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:2(75)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record