Show simple item record

dc.contributor.authorJanos Gergely
dc.contributor.authorChris P. Pantelides
dc.contributor.authorLawrence D. Reaveley
dc.date.accessioned2017-05-08T21:30:23Z
dc.date.available2017-05-08T21:30:23Z
dc.date.copyrightMay 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A2%2856%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54055
dc.description.abstractThe rehabilitation of RC columns jacketed with carbon fiber-reinforced plastic (FRP) composites for improving shear strength, confinement, and ductility has received considerable attention. However, research for improving the shear capacity of beam-column T-joints using FRP composite materials is still in the early stages. The present paper describes the experimental results of 14 1/3-scale tests of concrete beam-column joints. The variables considered were the composite system, the fiber orientation, and the surface preparation. The tests have demonstrated the viability of carbon FRP composites for their use in improving the shear capacity of the joints as evidenced by the experimental results. Based on these experimental results, a design aid was developed for T-joints with inadequate confinement and shear reinforcement.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Strengthening of RCT-Joints Using CFRP Composites
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:2(56)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record