Show simple item record

dc.contributor.authorMichael D. Hayes
dc.contributor.authorDon Ohanehi
dc.contributor.authorJohn J. Lesko
dc.contributor.authorThomas E. Cousins
dc.contributor.authorDan Witcher
dc.date.accessioned2017-05-08T21:30:23Z
dc.date.available2017-05-08T21:30:23Z
dc.date.copyrightMay 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A2%2848%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54054
dc.description.abstractA composite bridge deck system assembled from glass/polyester pultruded components has been developed. This system utilizes square tubes running transverse to the traffic direction, mechanically fastened and bonded together, and flat cover plates bonded to the tubes with an epoxy adhesive and through-anchored to the deck support structure using mechanical connectors. A 4.27 × 1.22 m section of the deck system integrally connected to the superstructure at a 1.2 m girder spacing was tested to failure under a single patch loading. The results indicate a factor of safety of 4 on strength and a deflection-to-span ratio of about L/300. Another section of the deck was fatigued to 3,000,000 cycles under service loading at a load ratio of
dc.publisherAmerican Society of Civil Engineers
dc.titlePerformance of Tube and Plate Fiberglass Composite Bridge Deck
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:2(48)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record