Show simple item record

dc.contributor.authorY. J. Lee
dc.contributor.authorT. E. Boothby
dc.contributor.authorC. E. Bakis
dc.contributor.authorA. Nanni
dc.date.accessioned2017-05-08T21:30:21Z
dc.date.available2017-05-08T21:30:21Z
dc.date.copyrightNovember 1999
dc.date.issued1999
dc.identifier.other%28asce%291090-0268%281999%293%3A4%28161%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54040
dc.description.abstractAn analytical tension-stiffening model was developed for fiber-reinforced polymer (FRP) sheets bonded to reinforced concrete based on equilibrium equations and the assumption of linear behavior between bond stress and slip. Experimental measurements were made on small- and large-scale specimens. For the small-scale specimens, the primer coat thickness (adhesive thickness between concrete and FRP sheet) was varied for each specimen. By comparisons of the experimental data to the analytical results, the slip modulus at the concrete/FRP sheet and concrete/steel interface was established at the service load level. From this study, it was found that primer coat thickness has a modest influence on the slip modulus of the repaired member, and stiffening of this interface slightly enhances the stiffness of the specimen. After the formation of secondary and diagonal tension cracks, the stiffness of the specimen dropped rapidly and the linearly elastic slip modulus assumption could not be applied. The slip modulus at the concrete/steel rebar interface is less than at the concrete/FRP sheet interface and the slip modulus is independent of the type of FRP sheet.
dc.publisherAmerican Society of Civil Engineers
dc.titleSlip Modulus of FRP Sheets Bonded to Concrete
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(1999)3:4(161)
dc.treeJournal of Composites for Construction:;1999:;Volume ( 003 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record