Show simple item record

dc.contributor.authorMarijn R. Spoelstra
dc.contributor.authorGiorgio Monti
dc.date.accessioned2017-05-08T21:30:21Z
dc.date.available2017-05-08T21:30:21Z
dc.date.copyrightAugust 1999
dc.date.issued1999
dc.identifier.other%28asce%291090-0268%281999%293%3A3%28143%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54037
dc.description.abstractA uniaxial model for concrete confined with fiber-reinforced polymers (FRP), but also with steel jackets or conventional transverse reinforcement, is presented. The model, which is suitable to be inserted into fiber-type beam-column models, explicitly accounts for the continuous interaction with the confining device due to the lateral strain of concrete, through an incremental-iterative approach. The relation between the axial and lateral strains is implicitly derived through equilibrium between the (dilating) confined concrete and the confining device. This relation allows one to trace the state of strain in the jacket and to detect its failure. The model is compared with a set of experimental tests and shows very good agreement in both the stress-strain and the stress-lateral strain response. Evidence of the main aspects of the behavior of FRP-confined concrete is given that points out differences in the response when using fiberglass or carbonfiber. Predictive equations to determine the ultimate strength and strain of concrete confined with FRP are derived and tested on a number of experimental data.
dc.publisherAmerican Society of Civil Engineers
dc.titleFRP-Confined Concrete Model
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(1999)3:3(143)
dc.treeJournal of Composites for Construction:;1999:;Volume ( 003 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record