Show simple item record

dc.contributor.authorAmmon Katz
dc.contributor.authorNeta Berman
dc.contributor.authorLawrence C. Bank
dc.date.accessioned2017-05-08T21:30:20Z
dc.date.available2017-05-08T21:30:20Z
dc.date.copyrightMay 1999
dc.date.issued1999
dc.identifier.other%28asce%291090-0268%281999%293%3A2%2873%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54028
dc.description.abstractThe bond properties of fiber reinforced polymer (FRP) reinforcing bars (rebars) at temperatures ranging from room temperature (20°C) to high temperatures of up to 250°C are discussed in this paper. The bond properties in this temperature range were studied for a number of commercially produced rebars, where different bond “treatments” were applied to FRP rebars. Test results showed a reduction of between 80 and 90% in the bond strength as the temperature increased from 20 to 250°C. In comparison, ordinary deformed steel rebars showed a reduction of only 38% in the same temperature range. In addition, a reduction in the bond stiffness, which was determined from the slope of the ascending branch of the pullout load versus slip curve, was seen as the temperature increased. At elevated temperatures the postpeak bond decrease was gradual as compared with the instantaneous drop at room temperature. Greater sensitivity to high temperatures was seen in FRP rebars, in which the bond relies mainly on the polymer treatment at the surface of the rod.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of High Temperature on Bond Strength of FRP Rebars
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(1999)3:2(73)
dc.treeJournal of Composites for Construction:;1999:;Volume ( 003 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record