Show simple item record

dc.contributor.authorRichard Andrew Barnes
dc.contributor.authorGeoffrey Charles Mays
dc.date.accessioned2017-05-08T21:30:20Z
dc.date.available2017-05-08T21:30:20Z
dc.date.copyrightMay 1999
dc.date.issued1999
dc.identifier.other%28asce%291090-0268%281999%293%3A2%2863%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54027
dc.description.abstractRecent increases in bridge design loading requirements have highlighted the need for fast, efficient, and durable strengthening methods. External steel plate bonding provides a satisfactory solution, but carbon fiber reinforced plastic (CFRP) offers the added advantages of resistance to corrosion, low weight, and high mechanical strength. This paper examines the fatigue performance of CFRP-strengthened concrete beams as part of a project investigating the use of CFRP as an alternative to steel. Five reinforced concrete beams were tested in fatigue; two control beams and three strengthened with externally bonded CFRP plates. Three loading options were used: (1) apply the same loads to both plated and unplated beams, (2) apply loads to give the same stress range in the rebar in both beams, and (3) apply the same percentage of the ultimate load capacity to each beam. Fatigue fracture of the internal reinforcement steel would appear to be the dominant factor governing failure, and it would appear reasonable to expect the same fatigue life for plated and unplated beams with comparable values of stress range in the steel bar.
dc.publisherAmerican Society of Civil Engineers
dc.titleFatigue Performance of Concrete Beams Strengthened with CFRP Plates
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(1999)3:2(63)
dc.treeJournal of Composites for Construction:;1999:;Volume ( 003 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record