Show simple item record

dc.contributor.authorMostafiz Chowdhury
dc.contributor.authorRobert Hall
dc.contributor.authorPete Hoffman
dc.date.accessioned2017-05-08T21:30:17Z
dc.date.available2017-05-08T21:30:17Z
dc.date.copyrightMay 1998
dc.date.issued1998
dc.identifier.other%28asce%291090-0268%281998%292%3A2%2869%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/53997
dc.description.abstractExperimental results for full-scale composite and steel wickets at the Olmsted Prototype Wicket Dam, Smithland Facility, Smithland, Ky. are compared to evaluate their performance under various flow and operating conditions. A composite wicket, along with four traditionally coated steel gates, was installed in this facility. A series of flow experiments measured the responses of the steel and composite wickets under anticipated service-load conditions. The composite structure was built of Morrison Molded Fiberglass (MMFG) Extren 625 glass/vinylester pultruded sheets, stiffened transversely and longitudinally by MMFG Extren 625 I-beams. The Smithland facility provided a unique opportunity to demonstrate the feasibility of using low-cost composite materials in navigation structures. This facility also provided a major testing ground to measure the relative fitness of various wicket components in terms of their durability, serviceability, and reliability under service conditions. A good correlation of acceleration and pressure time–history data for both composite and steel prototype wickets was obtained. The composite gate has a much greater vibratory response (in amplitude) than the prototype steel gate under similar operating conditions. No major sign of distress inhibiting the use of these wickets is observed in either the steel or the composite gates.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Results for Full-Scale Composite and Steel Wickets at Smithland Facility
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(1998)2:2(69)
dc.treeJournal of Composites for Construction:;1998:;Volume ( 002 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record