Simply Supported Curved Cellular Bridges: Simplified Design Method

Abstract

The use of curved composite bridges in interchanges of modern highway systems has become increasingly popular for economic and aesthetic considerations. Bridges with a concrete deck composite with a steel multicell section can adequately resist torsional and warping effects induced by high curvature. Although current design practices in North America recommend few analytical methods for the design of curved multicell box girder bridges, economical requirements in the design process point to a need for a simplified design method. This paper summarizes the results from an extensive parametric study, using the finite-element method, in which simply supported curved composite multicell bridge prototypes are analyzed to evaluate the moment and deflection distributions between girders, as well as the axial forces expected in the bracing system, due to truck loading as well as dead load. Results from tests on four, 1/12 linear-scale, simply supported curved composite concrete deck-steel multicell bridge models are used to substantiate and verify the analytical modeling. The parameters considered in the study are cross-bracing system, aspect ratio, number of lanes, number of cells, and degree of curvature. Based on the data generated from the parametric study, expressions for moment and deflection distribution factors are deduced. Expressions for the maximum axial force in bracing members are also derived. An illustrative design example is presented.