Show simple item record

dc.contributor.authorAshraf A. Ahmed
dc.contributor.authorAbdallah S. Bazaraa
dc.date.accessioned2017-05-08T21:24:30Z
dc.date.available2017-05-08T21:24:30Z
dc.date.copyrightMarch 2009
dc.date.issued2009
dc.identifier.other%28asce%291084-0699%282009%2914%3A3%28243%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/50306
dc.description.abstractThis paper investigates the problem of seepage under the floor of hydraulic structures considering the compartment of flow that seeps through the surrounding banks of the canal. A computer program, utilizing a finite-element method and capable of handling three-dimensional (3D) saturated–unsaturated flow problems, was used. Different ratios of canal width/differential head applied on the structure were studied. The results produced from the two-dimensional (2D) analysis were observed to deviate largely from that obtained from 3D analysis of the same problem, despite the fact that the porous medium was isotropic and homogeneous. For example, the exit gradient obtained from 3D analysis was as high as 2.5 times its value obtained from 2D analysis. Uplift force acting upwards on the structure has also increased by about 46% compared with its value obtained from the 2D solution. When the canal width/ differential head ratio was 10 or higher, the 3D results were comparable to the 2D results. It is recommended to construct a core of low permeability soil in the banks of canal to reduce the seepage losses, uplift force, and exit gradient.
dc.publisherAmerican Society of Civil Engineers
dc.titleThree-Dimensional Analysis of Seepage below and around Hydraulic Structures
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue3
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(2009)14:3(243)
dc.treeJournal of Hydrologic Engineering:;2009:;Volume ( 014 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record