Show simple item record

dc.contributor.authorKathryn S. Lowe
dc.contributor.authorSheila M. Van Cuyk
dc.contributor.authorRobert L. Siegrist
dc.contributor.authorJörg E. Drewes
dc.date.accessioned2017-05-08T21:24:24Z
dc.date.available2017-05-08T21:24:24Z
dc.date.copyrightAugust 2008
dc.date.issued2008
dc.identifier.other%28asce%291084-0699%282008%2913%3A8%28735%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/50239
dc.description.abstractA conventional on-site wastewater system (OWS) is traditionally comprised of one or more septic tanks for treatment of raw wastewater followed by percolation through natural soil to achieve purification prior to groundwater recharge. Other types of engineered treatment units (e.g., sand filters, textile media filters) may be implemented where site conditions are not suitable for conventional systems or in sensitive areas, such as those with nitrogen loading concerns. The research presented here is part of a large field study conducted to evaluate the purification performance of OWS employing three different engineered treatment units: a septic tank, a septic tank with a textile filter unit (TFU), and a septic tank with a membrane bioreactor (MBR). The TFU or MBR employ treatment processes that are designed to achieve higher purification compared to a septic tank so that soil treatment can be accomplished at higher hydraulic loading rates and/or with less unsaturated soil depth. This paper describes the installation, operation, and monitoring of the effluent generated from three engineered treatment units operated for a period of 16–28 months. The three treatment units, as expected, achieved different purification efficiencies for organic matter, total suspended solids, nutrients, and bacteria with the relative removal efficiency of
dc.publisherAmerican Society of Civil Engineers
dc.titleField Evaluation of the Performance of Engineered On-Site Wastewater Treatment Units
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue8
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(2008)13:8(735)
dc.treeJournal of Hydrologic Engineering:;2008:;Volume ( 013 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record