Show simple item record

dc.contributor.authorChiara Vassena
dc.contributor.authorMauro Giudici
dc.contributor.authorGiansilvio Ponzini
dc.contributor.authorGuido Parravicini
dc.contributor.authorGiovanni Angelo Meles
dc.date.accessioned2017-05-08T21:24:09Z
dc.date.available2017-05-08T21:24:09Z
dc.date.copyrightNovember 2007
dc.date.issued2007
dc.identifier.other%28asce%291084-0699%282007%2912%3A6%28617%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/50079
dc.description.abstractIf two independent sets of data are available—the piezometric heads and the related source terms for two stationary flow situations, such that the hydraulic gradients are not parallel to each other—the aquifer transmissivity can be identified with the differential system method (DSM), provided that an initial value of transmissivity is given at least at one point. In field applications, it is difficult to collect two data sets that are independent throughout the aquifer, and the results depend on the location of the point where the initial value is assigned. These difficulties are reduced if several data sets are available and the differential system is obtained either by applying a least square technique to the whole ensemble of data sets, or by choosing the “best” couple of data at each point. Numerical tests on a synthetic aquifer show that both techniques yield good results and make the DSM more robust to noise on the piezometric heads than the standard DSM applied with two data sets only.
dc.publisherAmerican Society of Civil Engineers
dc.titleTomographic Approach to Identify Transmissivity with Differential System Method
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue6
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(2007)12:6(617)
dc.treeJournal of Hydrologic Engineering:;2007:;Volume ( 012 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record