Show simple item record

dc.contributor.authorBruce Hunt
dc.date.accessioned2017-05-08T21:23:54Z
dc.date.available2017-05-08T21:23:54Z
dc.date.copyrightNovember 2005
dc.date.issued2005
dc.identifier.other%28asce%291084-0699%282005%2910%3A6%28477%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/49892
dc.description.abstractA solution is obtained for unsteady flow to a continuous point sink in a homogeneous, anisotropic, leaky aquifer. Then superposition is used to distribute sinks with constant strength along straight-line segments to model flow to either partially penetrating vertical wells or nonvertical wells with finite length. The result is shown to duplicate the Hantush solution for flow to a vertical, partially penetrating well in a fully confined aquifer. However, differences occur when the corresponding result for a leaky aquifer is compared with an approximate solution obtained by Hantush, who assumed that inflow leakage is distributed uniformly over the full aquifer thickness. These differences are believed to result from inaccuracies in the Hantush approximation. Additional examples are used to illustrate the method, including flow to a single horizontal well, flow to two horizontal wells crossed at right angles to each other, and flow to a “blind” well formed by joining inclined and horizontal wells. A particle tracking exercise is carried out to illustrate use of this solution for pump-and-treat groundwater remediation.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlow to Vertical and Nonvertical Wells in Leaky Aquifers
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue6
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(2005)10:6(477)
dc.treeJournal of Hydrologic Engineering:;2005:;Volume ( 010 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record