Show simple item record

dc.contributor.authorQ. Q. Liu
dc.contributor.authorV. P. Singh
dc.date.accessioned2017-05-08T21:23:46Z
dc.date.available2017-05-08T21:23:46Z
dc.date.copyrightSeptember 2004
dc.date.issued2004
dc.identifier.other%28asce%291084-0699%282004%299%3A5%28375%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/49801
dc.description.abstractOverland flow on a hillslope is significantly influenced by its microtopography, slope length and gradient, and vegetative cover. A 1D kinematic wave model in conjunction with a revised form of the Green-Ampt infiltration equation was employed to evaluate the effect of these surface conditions. The effect of these conditions was treated through the resistance parameter in the kinematic wave model. The resistance in this paper was considered to be made up of grain resistance, form resistance, and wave resistance. It was found that irregular slopes with microtopography eroded more easily than did regular slopes. The effect of the slope gradient on flow velocity and flow shear stress could be negative or positive. With increasing slope gradient, the flow velocity and shear stress first increased to a peak value, then decreased again, suggesting that there exists a critical slope gradient for flow velocity and shear stress. The vegetative cover was found to protect soil from erosion primarily by enhancing erosion-resisting capacity rather than by decreasing the eroding capability of overland flow.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Microtopography, Slope Length and Gradient, and Vegetative Cover on Overland Flow through Simulation
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue5
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(2004)9:5(375)
dc.treeJournal of Hydrologic Engineering:;2004:;Volume ( 009 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record