Show simple item record

dc.contributor.authorA. K. Rastogi
dc.contributor.authorS. N. Pandey
dc.date.accessioned2017-05-08T21:23:08Z
dc.date.available2017-05-08T21:23:08Z
dc.date.copyrightJanuary 1998
dc.date.issued1998
dc.identifier.other%28asce%291084-0699%281998%293%3A1%2862%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/49401
dc.description.abstractThe influence of artificial recharge by a rectangular basin was computed using an algorithm based on the finite-element method. Ground-water head and flux in the underlying aquifer system were calculated for the rectangular basin. In addition, head distributions also were computed for circular, square, hexagonal, and triangular recharge basins with equal area and for the same recharge rate as the rectangular basin. A lower ground-water mound buildup was found for higher-perimeter basin shapes and vice versa. Influence of variation in hydraulic conductivity beneath the recharge basin due to gradual clogging of the aquifer pore spaces was investigated and the mass balance for the rectangular basin was checked. Time variant analysis computed a time of 82.3 days to stabilize the mound. The buildup was higher initially followed by a much slower growth as steady state was approached.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling of Artificial Recharge Basins of Different Shapes and Effect on Underlying Aquifer System
dc.typeJournal Paper
dc.journal.volume3
dc.journal.issue1
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)1084-0699(1998)3:1(62)
dc.treeJournal of Hydrologic Engineering:;1998:;Volume ( 003 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record