| dc.contributor.author | W. K. Chow | |
| dc.contributor.author | E. Cui | |
| dc.contributor.author | R. Huo | |
| dc.date.accessioned | 2017-05-08T21:21:55Z | |
| dc.date.available | 2017-05-08T21:21:55Z | |
| dc.date.copyright | September 2000 | |
| dc.date.issued | 2000 | |
| dc.identifier.other | %28asce%291076-0431%282000%296%3A3%2899%29.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/48606 | |
| dc.description.abstract | Experimental studies on natural smoke filling during an atrium fire were carried out in a new full-scale burning facility: the PolyU/USTC Atrium, at Hefei, Anhui, China. The internal dimension of the atrium is 22.4 m long, 11.9 m wide, and 27 m high. A diesel pool fire of 1.2 m diameter and heat release rate up to 654 kW was located at the center of the atrium floor. All vents of the atrium were closed, leaving just a vertical gap of width 1.65 m and height 0.2 m for supplying fresh air. Five hot smoke tests were carried out. Vertical temperature distributions and descending time of the smoke layer were measured. Results on the smoke-filling process compiled from the tests were compared with the USTC/PolyU model, a simple mathematical model developed from a plume equation appearing in the literature. Comparison was also made with the smoke-filling equation appearing in the literature. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Natural Smoke Filling in PolyU/USTC Atrium | |
| dc.type | Journal Paper | |
| dc.journal.volume | 6 | |
| dc.journal.issue | 3 | |
| dc.journal.title | Journal of Architectural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)1076-0431(2000)6:3(99) | |
| dc.tree | Journal of Architectural Engineering:;2000:;Volume ( 006 ):;issue: 003 | |
| dc.contenttype | Fulltext | |