Show simple item record

dc.contributor.authorKent A. Harries
dc.contributor.authorMichael F. Petrou
dc.contributor.authorGeorge Brooks
dc.date.accessioned2017-05-08T21:21:55Z
dc.date.available2017-05-08T21:21:55Z
dc.date.copyrightJune 2000
dc.date.issued2000
dc.identifier.other%28asce%291076-0431%282000%296%3A2%2858%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/48599
dc.description.abstractThe use of novel built-up columns as structural members is investigated. The columns are fabricated from dimensional timber and connected with mechanically applied adhesive, using a proprietary system. An extensive test program was carried out on full-scale built-up timber columns. Axial, flexural, and squash load tests, intended to characterize the service and ultimate behaviors of the columns, are reported. The results of the test program are compared with standard calculations of allowable design capacities for non-built-up timber columns. It is concluded that the built-up columns tested may be safely designed using the same methods as are used for solid timber columns that use the material properties of the constituent timbers. This results in a significant advantage in load-carrying capacity of the built-up sections over solid sections for columns having dimensions greater than 127 × 127 mm (5 × 5 in.).
dc.publisherAmerican Society of Civil Engineers
dc.titleStructural Characterization of Built-Up Timber Columns
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue2
dc.journal.titleJournal of Architectural Engineering
dc.identifier.doi10.1061/(ASCE)1076-0431(2000)6:2(58)
dc.treeJournal of Architectural Engineering:;2000:;Volume ( 006 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record