Show simple item record

dc.contributor.authorNathan D. Kaiser
dc.contributor.authorRichard A. Behr
dc.contributor.authorJoseph E. Minor
dc.contributor.authorLokeswarappa R. Dharani
dc.contributor.authorFangsheng Ji
dc.contributor.authorPaul A. Kremer
dc.date.accessioned2017-05-08T21:21:55Z
dc.date.available2017-05-08T21:21:55Z
dc.date.copyrightMarch 2000
dc.date.issued2000
dc.identifier.other%28asce%291076-0431%282000%296%3A1%2824%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/48592
dc.description.abstractExperimental results of low velocity, small steel ball impact tests on laminated architectural glass units are presented. These tests are part of an ongoing effort to develop a design method for laminated architectural glass units to resist windborne debris from sources such as roof gravel, as required in several current and proposed U.S. building codes and standards. A design concept known as “sacrificial ply” permits the exterior-facing, outer glass ply of a laminated glass unit to fracture during windborne debris impacts, but prevents fracture of the inner glass ply. This concept also depends on an inner glass ply designed to resist lateral wind pressures for the remainder of the windstorm so that the integrity of the building envelope is preserved. In these experiments, inner and outer glass ply thicknesses and polyvinyl butyral interlayer thickness were varied to determine their effects on the impact resistance of the
dc.publisherAmerican Society of Civil Engineers
dc.titleImpact Resistance of Laminated Glass Using “Sacrificial Ply” Design Concept
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue1
dc.journal.titleJournal of Architectural Engineering
dc.identifier.doi10.1061/(ASCE)1076-0431(2000)6:1(24)
dc.treeJournal of Architectural Engineering:;2000:;Volume ( 006 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record