Show simple item record

dc.contributor.authorStephen N. Flanders
dc.contributor.authorNorbert E. Yankielun
dc.date.accessioned2017-05-08T21:21:52Z
dc.date.available2017-05-08T21:21:52Z
dc.date.copyrightDecember 1998
dc.date.issued1998
dc.identifier.other%28asce%291076-0431%281998%294%3A4%28135%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/48554
dc.description.abstractThe writers have devised a prototype cable-based roof moisture detection and location system (U.S. Patent 5,648,724) that was tested in simulated conditions. The detection system can use a variety of principles to monitor roofing for the presence of moisture. The location system uses a metallic time-domain reflectometer (MTDR) to locate a suspected wet area by sending an electromagnetic pulse or step signal down the sensor cable and looking for reflections caused by a change in the dielectric constant surrounding the cable due to the presence of a wet area. Tests revealed the MTDR technique to be sensitive and able to locate the position of less than 1 L (0.22 gal.) of water within 0.3 m (1 ft) over 30.5 m (100 ft) of cable. Where multiple regions of wetting were present along the length of the cable, it was possible to locate each boundary between wet and dry.
dc.publisherAmerican Society of Civil Engineers
dc.titleLaboratory Tests of Cable-Based Roof Moisture Detection System
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue4
dc.journal.titleJournal of Architectural Engineering
dc.identifier.doi10.1061/(ASCE)1076-0431(1998)4:4(135)
dc.treeJournal of Architectural Engineering:;1998:;Volume ( 004 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record