Show simple item record

dc.contributor.authorHamdy, Mohamed
dc.contributor.authorIsmael, Mhadi A.
dc.contributor.authorKhedr, Alaa M.
dc.contributor.authorEl-Adawy, Mohammed
dc.contributor.authorNemitallah, Medhat A.
dc.date.accessioned2026-08-23T07:42:53Z
dc.date.available2026-08-23T07:42:53Z
dc.date.copyright2026/03/01
dc.date.issued2026
dc.identifier.issn2997-0253
dc.identifier.otherjerta-25-1429.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4315491
dc.description.abstractAbstract. This study experimentally investigates the effects of hydrogen enrichment and ignition timing (IG) variation on combustion and performance of a single-cylinder spark-ignition engine fueled with M30 (30% methanol, 70% gasoline by volume) at 1500 rpm and 50% load. Hydrogen was introduced into the intake manifold with its energy share varied from 10% to 40%, while IG was adjusted accordingly. Increasing hydrogen energy shares (HES) significantly accelerated combustion due to hydrogen's high flame speed and low ignition energy, leading to steeper pressure rise and advanced combustion phasing. Peak in-cylinder pressure increased by approximately 9 bar, and combustion duration shortened by 15–20% as the hydrogen energy share rose from 10% to 30%. A clear trade-off was observed, whereby moderate hydrogen enrichment (20–30% HES) enhanced the indicated thermal efficiency to around 25%, reduced specific fuel consumption by up to 21%, and increased indicated mean effective pressure to a maximum of 5.54 bar. Beyond 30% HES, air displacement effects began to limit performance gains. Overall, hydrogen enrichment between 20% and 30% HES, combined with IG between 18 deg crank angle (CA) and 24 deg CA before top dead center (BTDC), provided the best balance of combustion efficiency, work output, and knock resistance. These findings demonstrate the potential of hydrogen–methanol–gasoline tri-fuel operation as a practical strategy for improving efficiency and emissions in spark-ignition engines.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Hydrogen Enrichment and Ignition Timing on Combustion Characteristics and Performance of an M30-Fueled Spark-Ignition Engine
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
dc.identifier.doi10.1115/1.4071090
dc.journal.fristpage532
dc.journal.lastpage555
dc.page24
dc.treeJournal of Energy Resources Technology, Part A: Sustainable and Renewable Energy:;2026:;volume( 002 ):;issue:003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record