Advanced Power Management Strategies for Complex Hybrid-Electric Aircraft

Abstract

Abstract. Aircraft electrification for propulsion is a promising way to alleviate the negative environmental impact of conventional carbon-powered aviation. Inclusion of the electrical powertrain aims to enhance design freedom, allowing for more efficient power systems and operational schemes. In this work, a design space exploration is performed, aiming to derive power management guidelines based on aircraft environmental performance. A 19-passenger commuter aircraft employing the series/parallel partial hybrid-electric architecture is examined. Two underwing-mounted turboprop engines are combined with a boundary layer ingestion fan mounted in the aft of the aircraft and powered by an electrical drive. The primary electrical energy source is a battery system. A multidisciplinary framework is utilized, comprising modeling approaches for multipoint thermal engine design, physics-based electrical component sizing and performance, aircraft sizing, mission design, and environmental assessment. The investigation revealed that the reference designed hybrid-electric configuration with entry-into-service (EIS) 2035 assumed technologies yields roughly 18% improvement in block consumption and emissions, but an 8% increase in maximum takeoff weight (MTOW), compared to its 2014 conventional counterpart. The design space exploration for an optimal power management scheme indicated a minimum average ratio of 1:1.35 between cruise and design point hybridization power. However, even the optimally operated hybrid aircraft showcases worse environmental performance compared to the conventional design of same entry-into-service date. The investigation has revealed that the complex powertrain and hybrid architecture selected may be more suitable for larger class aircraft, where aircraft requirements can be relaxed and higher degrees of electrification are not penalized or confined by set constraints.