| dc.description.abstract | The control of initial support roughness is crucial to the structural waterproofing, durability, and safety of the drilling and blasting tunnel. The existing manual-based measurement methods and evaluation systems have many shortcomings in terms of efficiency, coverage, accuracy, and reliability, which make it difficult to achieve comprehensive measurement, precise quantification, and reliable evaluation of the initial support roughness. In view of this, this paper proposes a method for measuring the deviation of the initial support surface based on terrestrial laser scanning (TLS) technology, which achieves the automated measurement of the longitudinal and circumferential roughness characteristics of the initial support. Through the comparison experiment, it is demonstrated that the deviation measurement method proposed in the paper shows high accuracy, with an average error of 5.4 mm, which is much better than the current criteria and meets the measurement accuracy requirement of tunnel projects. On this basis, we propose a system for quantifying and evaluating the initial support roughness. This paper proposes indicators such as the root-mean square of the deviation (Drms), the skewness of the deviation (Dsk), and the kurtosis of the deviation (Dku) to quantify the roughness from three dimensions, such as the amplitude of the deviation, the degree of surface inclination, and the sharpness of the wave peaks, respectively, which significantly improves the accuracy, comprehensiveness, and richness of the roughness evaluation. Finally, a three-dimensional model of the initial support surface with a color-coded map was used to visualize the multidimensional roughness of the different inspection areas and to accurately locate areas of poor roughness level in the construction coordinate system. The aforementioned work is of great help in identifying, evaluating, locating, and treating initial support surface distresses. | |
