Analytical Model of the Evolution of Surface Topography During Sliding Wear

Abstract

During the wear process of surfaces in sliding friction, there is a running-in period during which the topography of surfaces changes with time before reaching the steady wear regime. In the steady wear regime, the statistical parameters used to describe the topography of the surfaces remain almost constant. Some experimental studies have shown that starting friction tests with different surface finish levels leads to the same final topography of surfaces in the regime of steady wear. This article proposes an analytical model to describe the evolution of the topography of surfaces during sliding wear. First of all, the Greenwood and Williamson approach is used to describe the contact between nominally flat rough surfaces. The asperities in contact may undergo plastic deformation or adhesion with the opposing surface. Using a plasticity criterion and an adhesion criterion, it is possible to obtain a differential equation for the evolution of the standard deviation of the asperities of the surfaces. This equation has an analytical solution that is in good agreement with experimental results from the literature. It is shown that the final surface topography is the result of the competition between abrasive wear and adhesive wear. The model is then used to describe different wear processes from polishing to galling.