Show simple item record

dc.contributor.authorSehar Anum
dc.contributor.authorSheng Liu
dc.contributor.authorPeng Zhang
dc.contributor.authorJunjie Yue
dc.contributor.authorLianying Zhang
dc.contributor.authorQifu Liang
dc.contributor.authorAmir Bostani
dc.contributor.authorHongwen Sun
dc.date.accessioned2025-08-17T23:01:54Z
dc.date.available2025-08-17T23:01:54Z
dc.date.copyright6/1/2025 12:00:00 AM
dc.date.issued2025
dc.identifier.otherJOEEDU.EEENG-8059.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4307804
dc.description.abstractPyrolytic carbon (PC) shows potential as an adsorbent, but its adsorption capacity is limited due to its specific surface area (SSA) and low functional group abundance. The adsorption capacity of PC can be enhanced by increasing its SSA and the abundance of functionalities. Herein, novel acid/alkali hydrothermal modification of PC (H300ac and H300al) with H3PO4 and NaOH was employed to remove Cd and Pb from contaminated water. The hydrothermal modifications with acid/alkali not only increased the SSA and pore structure of the biochar but also introduced O- and P-containing functional groups (OFGs and PFGs, e.g., ─ COOH, ─ OH, and ─PO43−). The results of adsorption kinetics and isotherm revealed that the adsorption of Cd and Pb on H300ac and H300al was characterized by chemisorption monolayer formation, fitting well with the pseudo-second-order model and Langmuir model. The maximum adsorption capacities were 210.3  mg/g for Pb on H300ac, 21.7  mg/g for Cd, and 170.3  mg/g for Pb on H300al, which were 13–20 times higher than those of the pristine biochar. Characterization analysis confirmed that the primary mechanisms involved in the adsorption of Cd and Pb by H300ac and H300al are surface complexation, precipitation, and ion exchange between Cd/Pb ions and the OFGs and PFGs on the biochar surface. This study provides an efficient and eco-friendly adsorbent synthesized from agricultural waste for the remediation of Cd and Pb from contaminated water. High-performance heavy metal adsorbents are urgently needed to remediate contaminated water, and the morphological characteristics should be systematically explored to enhance the adsorption properties for Cd (cadmium) and Pb (lead). In this study, innovative acid/alkali hydrothermally modified biochar materials (H300ac and H300al), featuring large specific surface areas (SSA) and abundant surface functional groups, were designed to effectively remediate Cd (cadmium) and Pb (lead) from contaminated water. This work aims to elucidate the critical role of biochar surface chemistry and SSA in the remediation of Cd (cadmium) and Pb (lead) from contaminated water. The study provides a low-cost, promising, and eco-friendly adsorbent (H300ac and H300al) synthesized from agricultural waste for the remediation of heavy metal-contaminated water.
dc.publisherAmerican Society of Civil Engineers
dc.titleHydrothermal Chemical Modification of Biochar for Improving Cd and Pb Adsorption: Performance and Mechanism
dc.typeJournal Article
dc.journal.volume151
dc.journal.issue6
dc.journal.titleJournal of Environmental Engineering
dc.identifier.doi10.1061/JOEEDU.EEENG-8059
dc.journal.fristpage04025026-1
dc.journal.lastpage04025026-11
dc.page11
dc.treeJournal of Environmental Engineering:;2025:;Volume ( 151 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record