Show simple item record

dc.contributor.authorChuanpeng Liu
dc.contributor.authorYanqi Song
dc.contributor.authorFuxin Shen
dc.contributor.authorJunjie Zheng
dc.contributor.authorZhixin Shao
dc.contributor.authorJuntao Yang
dc.contributor.authorZhibin Hao
dc.date.accessioned2025-08-17T22:57:49Z
dc.date.available2025-08-17T22:57:49Z
dc.date.copyright7/1/2025 12:00:00 AM
dc.date.issued2025
dc.identifier.otherIJGNAI.GMENG-10616.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4307702
dc.description.abstractTo investigate the influence of ground stress on the fracture distribution and damage characteristics of blasted rock masses, this paper conducts a quantitative analysis of the radius and distribution characteristics of the damage zone under varying ground stress conditions. Using ANSYS/LS-DYNA analysis software, a numerical model of single-hole blasting was established to analyze the dynamic evolution of the stress field around the borehole under ground stress. Based on the numerical simulation results, a formula relating the stress attenuation coefficient to ground stress was obtained through nonlinear fitting. Combined with theoretical analysis, a predictive model for the radius of the smash zone and the crack zone of the blasted rock mass under ground stress was developed. The results indicate that ground stress not only inhibits the development of blasting damage but also guides the direction of crack propagation. Under isobaric ground stress, the crack zone is circularly distributed, with the area decreasing nonlinearly as ground stress increases. Under unequal pressure ground stress, the crack zone is elliptically distributed, with fractures primarily propagating along the direction of the maximum principal stress. As the unequal pressure coefficient increases, the ellipse’s eccentricity continuously increases.
dc.publisherAmerican Society of Civil Engineers
dc.titleStudy on the Blasting Damage Range of Rock Mass under the Action of Ground Stress
dc.typeJournal Article
dc.journal.volume25
dc.journal.issue7
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-10616
dc.journal.fristpage04025128-1
dc.journal.lastpage04025128-12
dc.page12
dc.treeInternational Journal of Geomechanics:;2025:;Volume ( 025 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record