Show simple item record

dc.contributor.authorTuan A. Pham
dc.contributor.authorMelis Sutman
dc.contributor.authorSadegh Nadimi
dc.date.accessioned2025-08-17T22:47:38Z
dc.date.available2025-08-17T22:47:38Z
dc.date.copyright5/1/2025 12:00:00 AM
dc.date.issued2025
dc.identifier.otherIJGNAI.GMENG-10364.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4307458
dc.description.abstractThe unsaturated geological layers are a common site of many engineering projects; however, it is challenging to predict their water retention capacity and shear strength. Through analysis of soils with dual-porosity structures, a new effective stress equation was then established in this paper that considered the saturated and unsaturated fractions of a bimodal structure soil. The effective stress theory was extended to provide a new shear strength criterion that incorporates capillary water, local characteristics, and the micro–macro transition behavior of unsaturated soils. This paper also introduces a novel model of the soil–water characteristic curve (SWCC) that simultaneously combines the dual-porosity structure theory and the capillarity-adsorption water retention theory of unsaturated soils. In this model, the total amount of water retained in soil pores is explicitly distinguished by capillary and adsorbed water attraction. The adsorbed component of the SWCC displays a peak value at an intermediate suction with a hill-shaped curve, indicating the degree of saturation due to adsorption decreases after an initial increase. The capillary component of SWCC is a typical s-shaped curve, which indicates that more capillary pores are dried along with increasing suction. An extended model of the suction stress characteristic curve was then established under both isothermal and nonisothermal conditions. A good agreement is found when comparing the outcomes of experiments with the present method. It has been proved that the capillary water and particle contact area ratio impact the shear behavior of unsaturated soils. The results demonstrate that the proposed model offers a significantly more accurate prediction across various suction levels and soil types. Unsaturated geological layers are a prevalent site in practical engineering projects. In recent years, the soils cycle between saturated and unsaturated states also occurred due to the impacts of climate change on evaporation and infiltration. The soil shear strength varies greatly in these conditions, which could affect the stability of geostructures. Rainfall-induced slope collapse is an example of this influence, where the shear strength in the shallow soil layers is decreased by the infiltrating rainwater. Therefore, it is critical to assess the behavior of unsaturated soil and any prospective changes in soil strength. However, the current shear strength formulae are only applicable to uncompacted soils. This work creates a novel criterion for predicting the shear strength of unsaturated soils by using a combination of the dual-porosity structure theory and the capillarity-adsorption water retention theory. The suggested model offers a useful and straightforward tool for resolving geological, geotechnical, and geoenvironmental engineering challenges. The findings demonstrate that the proposed approach offers a far more potential prediction for a range of soil types and various engineering problems.
dc.publisherAmerican Society of Civil Engineers
dc.titleCapillary-Based Nonisothermal Suction Stress and Nonlinear Shear Strength Criteria for Unsaturated Compacted Soils
dc.typeJournal Article
dc.journal.volume25
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-10364
dc.journal.fristpage04025061-1
dc.journal.lastpage04025061-21
dc.page21
dc.treeInternational Journal of Geomechanics:;2025:;Volume ( 025 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record