Isothermal Flow Field Characterization of a Full-Scale Sector Combustor at Elevated Pressures

Abstract

An experimental investigation in a sector (20 deg) of full-scale annular gas turbine combustor is performed. The sector combustor is optically accessible for the flow and flame visualization of the primary and exit zones of the combustor. The distinctive feature of the experimental setup is that it preserves the geometrical details of an annular combustor that includes the casing, dome and combustor liner. The combustor design features a series of primary and secondary dilution holes with multiple film cooling strips on the outer and inner liner. In the present study, the combustor is operated at inlet Mach numbers of 0.02–0.3 at operating absolute pressures of 1–5 bar. Static pressure measurements are performed at multiple locations in the rig to characterize the pressure drop across the combustor. Two-dimensional particle image velocimetry (PIV) is performed to measure the velocity fields of the primary and exit zones of the combustor simultaneously. The results show the presence of a central recirculation zone (CRZ), high-velocity annular jets, and a pair of dilution jets in the primary zone of the combustor. The steady-state flow structures are invariant of inlet Mach number and pressures. The relationship between the relative pressure drop across the combustor and the combustor inlet condition is obtained. Mass flowrate and momentum flux are calculated for the flow through the swirler, central recirculation zone, the primary dilution jets, and the exit zone. The paper shows how the flow structures in a realistic combustor change with variations in global combustor parameters.