Show simple item record

dc.contributor.authorTan, Zilin
dc.contributor.authorAn, Qier
dc.contributor.authorLi, Jingyang
dc.date.accessioned2025-04-21T10:32:01Z
dc.date.available2025-04-21T10:32:01Z
dc.date.copyright9/11/2024 12:00:00 AM
dc.date.issued2024
dc.identifier.issn2642-6641
dc.identifier.otherjesbc_5_3_031006.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4306390
dc.description.abstractIn extremely cold and remote areas such as the west of the Inner Mongolia region, due to the vast land and sparse population, the coverage rate of heating pipes is low, resulting in high non-renewable energy consumption in building heating. To reduce the reliance on polluted energy and utilize sufficient solar energy resources, this study proposed a solar-assisted air source heat pump heating system (SASHP) and realized abundant heating supply for Taolai Airport Terminal in Ejina Banner. Indoor temperature during the heating season was simulated using the trnsys and the coldest month was selected for analyzing and evaluating the heating performance of the SASHP. Compared with a single air source heat pump heating system, the SASHP achieves a 45.81% reduction in energy consumption, and the system's energy efficiency ratio (SEER) increases from 4.14 to 7.85. In addition, the average indoor temperature is 1.02 °C higher than that of the traditional gas boiler heating system on the coldest day. Aiming to minimize the equivalent annual cost, Hooke–Jeeves algorithm is used to optimize key parameters of the SASHP and the solar fraction increased from 45.99% to 51.91%, the SEER improved from 7.85 to 8.74. The optimized system has significantly improved in terms of system performance, while also demonstrating good energy saving, environmental protection, and economic benefits, which can provide a reference for the optimization and application of similar projects.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimulation and Analysis of Solar-Assisted Air Source Heat Pump Heating System in Remote and Cold Regions
dc.typeJournal Paper
dc.journal.volume5
dc.journal.issue3
dc.journal.titleASME Journal of Engineering for Sustainable Buildings and Cities
dc.identifier.doi10.1115/1.4066381
dc.journal.fristpage31006-1
dc.journal.lastpage31006-11
dc.page11
dc.treeASME Journal of Engineering for Sustainable Buildings and Cities:;2024:;volume( 005 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record