Analysis of Thermo-Acoustic Instabilities Induced by Hydrogen Swirling Flames

Abstract

A considerable research effort has been concerned combustion dynamics of systems fed with hydrocarbon fuels. The case of pure hydrogen/air flames deserves to be specifically considered because hydrogen is highly reactive, has a tendency to develop thermo-diffusive instabilities, is envisaged in many future applications, most notably in gas turbines, and is less well documented. Thermo-acoustic instabilities of pure hydrogen flames are here investigated in a configuration where hydrogen is injected in-crossflow in a swirling stream of air. The study is focused on operating conditions that lead to oscillatory regimes. Using Abel-transformed phase-averaged images of OH* emission and visible light emission in burnt gases, it is shown that the OH* signal evolves approximately in phase with the heat release rate. This signal is then used to determine the local Rayleigh source term that feeds acoustic energy in the oscillation. The contributions of this term are examined using a space–time analysis based on an integration of the source term in the transverse direction. This procedure allows a detailed analysis of the processes that contribute to the acoustic energy in the system, showing, in particular, that a strong positive addition of acoustic energy results from a roll-up of the flame tip and from the quick cyclic back propagation of the flame to the injector tip. A global integration of the Rayleigh source term is then used together with a volume-integrated acoustic energy to estimate the growth rate associated with these driving processes and estimate the damping rate. A special experimental method is then exploited to determine the effective growth rate of the instability. The system allowing a sweep in frequency, self-sustained instabilities obtained at different frequencies are used to extract the specific instability frequency band of the burner. Finally, the flame is externally forced in order to measure its flame-describing function.