Show simple item record

dc.contributor.authorHavlík, Jan
dc.contributor.authorDlouhý, Tomáš
dc.contributor.authorKrempaský, Jakub
dc.date.accessioned2025-04-21T10:22:58Z
dc.date.available2025-04-21T10:22:58Z
dc.date.copyright11/21/2024 12:00:00 AM
dc.date.issued2024
dc.identifier.issn0098-2202
dc.identifier.otherfe_147_04_041204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4306070
dc.description.abstractIn this work, the heat transfer in double pipe heat exchangers (DPHEs) with small tube spacing is analyzed. This type of heat transfer is generally described in many literary sources; however, in laminar flow, the resulting values of the theoretical equations differ. Moreover, the small spacing of the pipes can affect the fluid flow and subsequent heat transfer. The suitability of using available theoretical methods for the design of double pipe heat exchangers (the Stephan, VDI, and Baehr methods) was evaluated. A series of experiments was carried out on a double pipe heat exchanger with a tube spacing of 1.4 mm. The experimentally determined value of the heat transfer coefficient (HTC) was up to two times higher in comparison with the values calculated according to theoretical methods. The relative increase was more significant for the lower Reynolds number values. At the same time, the difference of the wall temperature along the circumference of the outer tube was detected. This phenomenon was theoretically analyzed and can be explained by tube misalignment in the small tube spacing. The procedure of quantification of this effect was proposed. This effect may cause an inhomogeneity of the media flow and temperature distribution and, as a result, increase the performance of the heat exchanger by tens of percent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer in Double Pipe Heat Exchangers With Small Tube Spacing
dc.typeJournal Paper
dc.journal.volume147
dc.journal.issue4
dc.journal.titleJournal of Fluids Engineering
dc.identifier.doi10.1115/1.4066930
dc.journal.fristpage41204-1
dc.journal.lastpage41204-10
dc.page10
dc.treeJournal of Fluids Engineering:;2024:;volume( 147 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record