| dc.description.abstract | Ducted liftfans provide greater hovering efficiency to electric vertical take-off and landing aircraft than open propellers of equal disk area. Liftfans are designed with minimized length to limit propulsor weight added and drag incurred during forward flight. Three challenges posed by the liftfan propulsor configuration are addressed in this paper. First, instead of a single-row propeller, liftfans require the design of a fully integrated stage. To maximize the hovering figure of merit, a non-dimensional measure of power consumption, the preliminary and 3D design variables of the rotor and splittered diffuser stator rows are optimized simultaneously using 3D computational fluid dynamics (CFD). The resulting prototype liftfan design is validated through experimental testing. Second, despite efficiency improvements during hover, liftfans sustain additional inlet distortion and drag during forward flight due to their surrounding nacelles. A low-order model is developed to investigate the maximum range for different fan designs with varying diffuser area ratios and forward flight tilt angles. Design selections are validated using full annulus, 3D CFD, and experimental wind tunnel tests. Third, as the electric motors of liftfans are mounted within the hub, fan-driven active cooling is necessary to prevent overheating. The stagnation pressure losses incurred by cooling airflow must be minimized without impeding heat transfer. Low-order models are developed to predict motor heat transfer and loss and to guide the design of a mixed-flow cooling fan. Experimental testing and 3D CFD simulations confirm that the addition of forward sweep and adoption of a high blade count can reduce cooling fan losses. | |
