| dc.description.abstract | This paper discusses the modal global stability analysis of the boundary layer (BL) formed over a circular cylinder subjected to oblique nonuniform suction and injection. The linearized stability equations governing the system are obtained using a standard procedure in the cylindrical coordinate system, followed by discretization using the spectral method. The discretized equations, accompanied by suitable boundary conditions, constitute an eigenvalue problem (EVP) that is solved using the arpack with a shift-and-invert approach. The stability computations are performed for different inclination angles (θ = 30 deg,60 deg,90 deg,120 deg, and 150 deg), transpiration velocities (I=0.5%, 1.5%, and 2.5% of U∞), Reynolds numbers (Reδ*=195,285, and 411), and different azimuthal wavenumbers (N=0−10) for both uniform and nonuniform profiles of suction and injection. The results reveal that instability modes, such as Tollmien–Schlichting (T–S) waves, are damped due to suction and amplified due to injection. The T–S branch of the eigenspectra shifts toward the damped region as the suction angle increases, while it moves toward the upper half-plane as injection angle increases, specifically from θ=0 deg to 90 deg. The uniform suction profile is found to be modally more stable than the nonuniform profiles, while nonuniform injection profiles are found to be more stable than the uniform profile. The energy balance analysis is also performed corresponding to leading nonstationary eigenmodes, and the results reveal that suction has a strong damping viscous dissipation (VD) effect, while injection has a strong amplifying energy production effect. | |
