Structural Behavior of Prefabricated Composite Cold-Formed Steel and Timber Flooring Systems

Abstract

In this study, the structural performance of a new type of lightweight composite cold-formed steel and timber (CFST) flooring system has been investigated by conducting four-point bending tests on 13 specimens. A bare cold-formed steel system without timber sheathing was also tested to provide a benchmark response to which the strength and stiffness of the composite system were compared. This paper presents key findings on the flooring system’s structural behavior and performance parameters, such as ultimate bending capacity, load-deflection response, load-slip response, and failure modes, by categorizing 13 specimens into four subgroups based on shear connector types and spacings. In the proposed composite CFST flooring system, 45-mm thick structural plywood panels were connected to the 2.4-mm thick cold-formed steel C-section joist using self-drilling screws, coach screws, and nuts and bolts. The performance of different types of shear connectors on the composite action is experimentally investigated and compared with the theoretical plastic section. Furthermore, the load-carrying capacity, effective bending stiffness, and deflection of composite CFST beams were computed theoretically using elastic theory and compared to experimental results, which showed good agreement.