Show simple item record

dc.contributor.authorMoein Khorashadizadeh
dc.contributor.authorMir Ali Hosseini
dc.contributor.authorAlireza Saeedi Azizkandi
dc.date.accessioned2024-04-27T22:37:29Z
dc.date.available2024-04-27T22:37:29Z
dc.date.issued2024/05/01
dc.identifier.other10.1061-IJGNAI.GMENG-9223.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297108
dc.description.abstractMany instances of severe damage to pile foundations and pile-supported infrastructures have been caused by liquefaction-induced lateral spreading during major earthquakes, particularly in coastal areas. The current study conducted a series of shaking table experiments to determine the differences between the responses of a free- and a fixed-head group pile under lateral spreading in the presence of finned and circular protection piles. The results indicated that the maximum bending moment tolerated by nonprotected free-head piles was more than that by fixed-head piles. Also, reductions in bending moments were more significant in free-head piles in the presence of protection piles than in fixed-head piles. The bending moments of front and rear piles under restricted pile head conditions were reduced by about 31% and 21%, respectively, when finned piles were used as protection piles, while they were 34% and 42%, respectively, under free-head conditions. Furthermore, modification factors of recommended lateral pressure distribution along a pile per the current design code were determined for the protected and nonprotected free- and fixed-head pile groups of the current study and it was observed that this modification factor (CL) was highly dependent on the location of piles in a group, pile head conditions, and the presence of protection piles in the lateral spreading analysis.
dc.publisherASCE
dc.titleComparison between Free- and Fixed-Head Pile Group Responses under Lateral Spreading in the Presence of Protection Piles Using Shake Table Tests
dc.typeJournal Article
dc.journal.volume24
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-9223
dc.journal.fristpage04024059-1
dc.journal.lastpage04024059-18
dc.page18
dc.treeInternational Journal of Geomechanics:;2024:;Volume ( 024 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record