Show simple item record

dc.contributor.authorHan Wang
dc.contributor.authorWang Qin
dc.contributor.authorWantao Ding
dc.contributor.authorChengzhen Wang
dc.contributor.authorWenduan Yu
dc.contributor.authorZhicheng Wang
dc.date.accessioned2024-04-27T22:37:11Z
dc.date.available2024-04-27T22:37:11Z
dc.date.issued2024/02/01
dc.identifier.other10.1061-IJGNAI.GMENG-9118.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297092
dc.description.abstractWith the gradual increase in the number of shield tunnels, the construction risks caused by segment floating have become increasingly prominent. Although many construction measures have been proposed to control segment floating, there are still shortcomings, such as difficulty in popularization and unclear application mechanisms. In this paper, a framework is proposed based on laboratory tests and theoretical calculations, aiming to obtain mix proportions to effectively reduce the phenomenon of segment floating. The laboratory test results show that the mix proportions significantly influence the variation law of grout buoyancy. During the solidification process, the grout buoyancy shows a nonlinear reduction law that first decreases rapidly and then slowly, and the hyperbolic function can accurately fit this law. The theoretical calculation results show that the segment uplifting displacement decreases with increasing cement content and increases with increasing fly ash and bentonite contents. The recommended grout mix proportions are the cement–water ratio of 0.5, the fly ash–water ratio of 0.3, and the bentonite–water ratio of 0.15. In addition to meeting the basic construction requirements, grouts with this mix proportions can also reduce the construction risk caused by segment floating during tunneling. The research results can provide practical guidance for preparing antifloating grouts.
dc.publisherASCE
dc.titleResearch on the Antifloating Performance of Grouts with Different Mix Proportions in Synchronous Grouting of Shield Tunnels: From Laboratory Tests to Theoretical Calculations
dc.typeJournal Article
dc.journal.volume24
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-9118
dc.journal.fristpage04023279-1
dc.journal.lastpage04023279-15
dc.page15
dc.treeInternational Journal of Geomechanics:;2024:;Volume ( 024 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record