Show simple item record

dc.contributor.authorDesen Kong
dc.contributor.authorSen Teng
dc.contributor.authorJian Shi
dc.contributor.authorMingkai Zhao
dc.date.accessioned2024-04-27T22:35:22Z
dc.date.available2024-04-27T22:35:22Z
dc.date.issued2024/06/01
dc.identifier.other10.1061-IJGNAI.GMENG-9028.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297013
dc.description.abstractTunneling efforts that use shield machines often encounter weak and fractured rock formations, where the stability of the tunnel face is the principle safety control factor during tunnel construction operations. Within the framework of the limit analysis method, an improved model was proposed. The model consists of two failure modes, effectively addressing the shortcomings that arise from the incomplete contact interface between the traditional model and the tunnel face. Furthermore, the proposed model introduces the nonlinear Hoek–Brown criterion and improves the shape of the sliding failure surface within the cover layer to account for the arching effect. Subsequently, the proposed model was validated by comparison with numerical simulations and results in the literature. Further parameter analysis was conducted to investigate the influence that the Hoek–Brown parameters and tunnel depth have upon the critical support pressure and effectively identify the characteristics of failure mechanisms. The resulting data show that a reduction in the geological strength index (GSI), Hoek–Brown parameter (mi), or uniaxial compressive strength (σci) or an increase in the disturbance coefficient (D) leads to a nonlinear increase in the critical support pressure and an expansion of the failure zone of the tunnel face. Conversely, as the tunnel depth increases, the extent of the failure zone gradually expands, and the stability of the tunnel face exhibits a trend of initially decreasing and then increasing.
dc.publisherASCE
dc.titleAn Improved Failure Model Considering the Arching Effect for Tunnel Face Stability in a Weak and Fractured Rock Mass
dc.typeJournal Article
dc.journal.volume24
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-9028
dc.journal.fristpage04024094-1
dc.journal.lastpage04024094-13
dc.page13
dc.treeInternational Journal of Geomechanics:;2024:;Volume ( 024 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record