Show simple item record

dc.contributor.authorRui Ding
dc.contributor.authorQiang Sun
dc.contributor.authorHailiang Jia
dc.contributor.authorLiyun Tang
dc.contributor.authorDelu Li
dc.date.accessioned2024-04-27T22:34:16Z
dc.date.available2024-04-27T22:34:16Z
dc.date.issued2024/04/01
dc.identifier.other10.1061-IJGNAI.GMENG-9010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4296968
dc.description.abstractLiquid nitrogen (LN2) fracturing is beneficial to the development and utilization of geothermal energy. In this paper, red sandstone was heated from room temperature to different temperatures (25°C–800°C) and then cooled with LN2. After attaining room temperature, nuclear magnetic resonance (NMR), uniaxial compression, and acoustic emission (AE) tests were conducted, and results were compared for different samples. The results showed that with an increase in quenching temperature difference, the volume of micropores decreased gradually, while the volume of fine pores, mesopores, macropores, and total porosity increased, resulting in the reduction of the compressive strength. A higher quenching temperature difference also reduced the sample’s total time to fail, and the failure mode was transformed from single inclined shear failure to conical failure. This is because the thermal stress (caused by the rapid cooling of LN2) expanded the original cracks of the sandstone, leading to high porosity and low compressive strength of the heat-treated and quenched samples.
dc.publisherASCE
dc.titleExperimental Study on the Compressive Strength and AE Characteristics of High-Temperature&#x2013;Treated and LN<sub>2</sub>-Cooled Sandstone
dc.typeJournal Article
dc.journal.volume24
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-9010
dc.journal.fristpage04024040-1
dc.journal.lastpage04024040-10
dc.page10
dc.treeInternational Journal of Geomechanics:;2024:;Volume ( 024 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record