Show simple item record

dc.contributor.authorMohammad Javad Mashinchian
dc.contributor.authorMohammad Mehdi Ahmadi
dc.date.accessioned2024-04-27T22:23:09Z
dc.date.available2024-04-27T22:23:09Z
dc.date.issued2024/04/01
dc.identifier.other10.1061-IJGNAI.GMENG-8812.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4296535
dc.description.abstractThe piezocone penetration test (CPTu) is a common geotechnical field test to evaluate soil properties. In interpreting the CPTu field measurements, soil drainage conditions are mostly considered completely drained or undrained; however, partial drainage conditions govern for such soils as silts or clayey sand mixtures. Previous studies show that neglecting partial drainage conditions causes incorrect estimation of soil geotechnical parameters. Most studies have been conducted using calibration chambers and centrifuge tests on clayey soils. Due to the complications in modeling the piezocone test, few numerical studies have been performed under partially drained conditions, especially on coarse-grained soils. Among the challenges of numerical modeling of CPTu, one can mention the difficulty of modeling soil structure in large strain mode and soil–water interaction behavior. In this paper, piezocone penetration tests were modeled using the advanced hypoplastic constitutive model and finite-element method. The behavior of Firoozkooh sandy soil under different drainage conditions and relative densities was analyzed. Then, the effect of cone penetration on the surrounding soils was discussed. It was shown that drainage conditions and the soil relative densities significantly affected the trend of variations in excess pore-water pressure (EPWP) generated around the piezocone.
dc.publisherASCE
dc.titleNumerical Study of the Piezocone Test in Sandy Soil under Different Drainage Conditions Using a Hypoplastic Constitutive Model
dc.typeJournal Article
dc.journal.volume24
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-8812
dc.journal.fristpage04024018-1
dc.journal.lastpage04024018-12
dc.page12
dc.treeInternational Journal of Geomechanics:;2024:;Volume ( 024 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record