• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Critical Softening Radius of a Development Heading Causing Rock Bursts

    Thumbnail
    View/Open
    10.1061-IJGNAI.GMENG-9035.pdf (1.713Mb)
    Date
    2023/12/01
    Author
    Shuan-Cheng Gu
    Pan Wang
    Chao-Fan Yang
    Metadata
    Show full item record
    Abstract
    Generally, prevention and control methods are adopted to reduce the possibility of regional stress-field-induced impact bursts in pressure relief engineering. However, such methods lack theoretical support and may inadvertently induce rock bursts owing to their improper implementation during the drilling process. Therefore, this paper proposes a method for calculating the critical softening radius of a development heading causing rock bursts under static load based on the theory of mutation, which is used to guide construction in local unloading engineering. According to the total potential energy principle, a cusp catastrophe model is established to determine the key-bearing ring instability of the surrounding rock; subsequently, a relationship between the softening radius and the stability coefficient of the key-bearing ring is deduced. Furthermore, a prediction model to determine the bearing ring stability is established. The stability criterion for the key-bearing ring of the surrounding rock is obtained, verified, and analyzed using calculation examples and actual engineering cases. The results demonstrate that the stability of the surrounding rock can be improved to a certain extent by degrading the strength of the coal rock mass. When the softening range exceeds a certain limit, the key-bearing ring becomes unstable owing to a nonlinear increase in the external load, thereby inducing rock bursts. Simultaneously, a surrounding rock with a higher hardness value exhibits a higher sensitivity to the pressure discharge; therefore, the softening radius of the area with a higher surrounding rock hardness value should be chosen more carefully. For the engineering cases, the upper limit of the critical softening radius calculated theoretically differed from existing theoretical calculation results by less than 15%. Similarly, the lower limit of the critical softening radius calculated theoretically differed from the stress peak position of the surrounding rock by less than 8%. These results verify the reliability and engineering application of the proposed method.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4296356
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV