• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Cut-Blasting Method Selection and Parameter Optimization for Rock Masses under High In Situ Stress

    Thumbnail
    View/Open
    10.1061-IJGNAI.GMENG-8802.pdf (4.184Mb)
    Date
    2023/12/01
    Author
    Jiajun Ding
    Jianhua Yang
    Zhiwei Ye
    Zhendong Leng
    Chi Yao
    Chuangbing Zhou
    Metadata
    Show full item record
    Abstract
    The aim of this study was to investigate the optimization of cut-blasting methods for deep rock masses under high in situ stress. Several plane fluid–structure interaction (FSI) models were established, and the blasting effects using common cut-blasting methods were analyzed. Considering the damage range of the rock mass and the blast-induced vibration after blasting, the cut-blasting method was selected as suitable for deep rock masses under high in situ stress. Subsequently, the cut-blasting parameters, including blasthole spacing, blasthole diameter, and the distance between the empty hole and the first cut-blasting hole, were optimized through the crack connectedness between the blastholes and the fractal dimension of the damaged rock mass. The results showed that the pentagonal cut-blasting method is more suitable for deep rock masses compared with other methods and the blasthole spacing should be reduced to resist any inhibitory effects from the increasing in situ stress. For in situ nonhydrostatic stress conditions, it is reasonable to choose a wider blasthole spacing in the direction of the major principal stress and a narrower one in the direction of the minor principal stress. Under high in situ stress, the joint optimization of blasthole spacing and blasthole diameter is recommended in order to avoid the poor cutting effect caused by too-narrow spacing. In addition, the formula for calculating the location of empty holes in shallow rock-mass blasting is also applicable to deep rock masses. The partially optimized results were preliminarily verified through comparison with existing field tests. These findings offer a new approach for enhancing the blasting effect on deep rock masses and may provide valuable guidance for the design and construction of cut blasting in deep rock masses.
    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4296311
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV