Show simple item record

dc.contributor.authorXiaopeng Su
dc.contributor.authorXiangyan Ren
dc.contributor.authorLei Zhou
dc.contributor.authorJunchao Chen
dc.contributor.authorXu Wei
dc.date.accessioned2024-04-27T20:52:44Z
dc.date.available2024-04-27T20:52:44Z
dc.date.issued2023/11/01
dc.identifier.other10.1061-IJGNAI.GMENG-8568.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4296156
dc.description.abstractFracture permeability is one of the critical factors affecting thermal production in hot dry rock reservoirs. Mechanical creep can cause temporal reduction of fracture permeability. However, the study solely on mechanical creep is limited, particularly under high confining stress. In addition, a physics-based stress- and time-dependent permeability model is essential for predicting the in situ geothermal production. This work aims to study the mechanical creep on the time-dependent fracture permeability. Long-term flow tests through single fractured granite samples under constant loading (20, 35, and 50 MPa, respectively) and stepwise increased loading (20 → 35 → 50 MPa) were conducted. The influence of the loading stress on the creep rate and the influence of the time on the permeability damage were quantitatively investigated. Based on the experimental data, a permeability model considering both stress and time effects was established based on viscous–elastic mechanics. According to the study, we obtained the following conclusions: (1) A higher constant confining stress can result in larger creep deformation, a larger damage ratio of hydraulic aperture (eh), and a longer duration of rapid reduction of eh. (2) The previously accumulated creep deformation can affect the subsequent time effect on the temporal evolution of eh when the loading stress changes, causing eh rapid reduction stage to weaken or disappear. (3) The transient creep behavior of eh can be described by the Kelvin creep model, and the maximum damage caused by the creep deformation is almost linearly proportional to the loading stress. The increase in stress caused by the bridging effect between adjacent contact asperities can dramatically reduce the creep rate. (4) The established permeability model can effectively predict the permeability with change in both stress and time considering the effect of accumulated creep deformation on the subsequent creep deformation, and it can be easily implemented in numerical simulation.
dc.publisherASCE
dc.titleExperimental and Model Study on the Time-Dependent Permeability of Rock Fractures Induced by Mechanical Creep
dc.typeJournal Article
dc.journal.volume23
dc.journal.issue11
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-8568
dc.journal.fristpage04023208-1
dc.journal.lastpage04023208-11
dc.page11
dc.treeInternational Journal of Geomechanics:;2023:;Volume ( 023 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record