Windage Torque Reduction in Low-Pressure Turbine Cavities Part I: Concept Design and Numerical Investigations

Abstract

The windage torque on rotational walls has a negative effect on the performance of the low-pressure turbine. In this paper, three novel flow control concepts (FCCs) were proposed to reduce the windage torque within a turbine stator well, with upstream and downstream cavities connected by an interstage labyrinth seal. The swirl and flow pattern inside a reference turbine cavity was first investigated and the potential locations for the FCCs were identified using numerical simulations. FCC1 was a circumferential row of leaned deflectors downstream of the labyrinth seal. FCC2 was a set of deflector vanes and platform to optimize the ingress swirl at high radius in the upstream cavity. FCC3 combined the two flow concepts and the superposition resulted in a stator well windage torque reduction of 70% when compared to the baseline design. The FCCs also showed performance benefits at off-design conditions and over a range of secondary flow rates to the cavity. In Part II, the numerical analysis and performance of the FCCs are validated in an experimental rig using additively manufactured components.