Show simple item record

dc.contributor.authorLee, T.
dc.contributor.authorNi, T.
dc.contributor.authorLin, G.
dc.date.accessioned2024-04-24T22:23:10Z
dc.date.available2024-04-24T22:23:10Z
dc.date.copyright1/17/2024 12:00:00 AM
dc.date.issued2024
dc.identifier.issn0098-2202
dc.identifier.otherfe_146_05_051202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4295124
dc.description.abstractThe aerodynamics and flowfield of a rectangular semiwing equipped with four four-bladed propellers and a 40%-chord full-span plain trailing-edge flap were investigated by using force balance and particle image velocimetry (PIV). The distributed electric propulsion (DEP) wing was tilted from zero to 90-deg angle of attack. The maximum lift coefficient, lift-curve slope, and stall angle of the DEP wing were found to increase significantly with increasing propeller rotation. The DEP wing also exhibited a gradual stall in contrast to the sudden stall of the baseline wing. The lift coefficient of the DEP wing positioned vertically at 90 deg was also found to be greatly increased with increasing propeller rotation. Regardless of the magnitude of propeller rotation, the general pattern and behavior of the lift curve were consistent. The deployment of the flap led to a further increase in the maximum lift coefficient and lift-curve slope but an earlier stall and an increased drag of the DEP wing as compared to the unflapped wing. The flap deflection also led to a lowered lift coefficient in the poststall angle-of-attack regime as compared to the unflapped DEP wing. Gurney flap was also employed to further increase the lift generation of the DEP wing. The lift augmentation produced by the propeller slipstream was supplemented by the PIV flowfield measurements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAerodynamics and Flowfield of Distributed Electric Propulsion Tiltwing During Transition With Deflected Trailing-Edge Flap
dc.typeJournal Paper
dc.journal.volume146
dc.journal.issue5
dc.journal.titleJournal of Fluids Engineering
dc.identifier.doi10.1115/1.4063934
dc.journal.fristpage51202-1
dc.journal.lastpage51202-14
dc.page14
dc.treeJournal of Fluids Engineering:;2024:;volume( 146 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record