Show simple item record

dc.contributor.authorZhuo Tang
dc.contributor.authorWengui Li
dc.contributor.authorQi Peng
dc.contributor.authorLibo Yan
dc.date.accessioned2023-11-27T23:12:34Z
dc.date.available2023-11-27T23:12:34Z
dc.date.issued12/1/2023 12:00:00 AM
dc.date.issued2023-12-01
dc.identifier.otherJCCOF2.CCENG-4138.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4293382
dc.description.abstractThe utilization of geopolymeric composites can considerably promote sustainability in the construction sector due to their low carbon footprint. In this work, an experimental study was performed to investigate the quasi-static cyclic behavior of geopolymeric composites confined by carbon fiber-reinforced polymer (CFRP). In total, 40 CFRP-confined geopolymeric composite columns were fabricated and tested. The primary variables included the matrix composition (i.e., slag contents of 0% and 10%), type of confined material (i.e., mortar and concrete with recycled aggregate replacement ratios of 0%, 50%, and 100%), and the load pattern (i.e., cyclic loading with a single cycle and cyclic loading with repeated cycles). Careful examination and analysis of the experiment results led to a series of conclusions regarding failure patterns, stress–strain behaviors, and characteristics under ultimate conditions. In addition, discussions were provided concerning the effects of the primary variables on the key characteristics of the stress–strain curves, which included plastic strain, residual and reloading moduli, and stress deterioration for the envelope and internal cycles. In addition, the prediction results by the existing models for fiber-reinforced polymer (FRP)-confined conventional concrete were compared with the test results to assess their applicability for CFRP-confined geopolymeric composites.
dc.publisherASCE
dc.titleQuasi-Static Cyclic Behavior of CFRP-Confined Geopolymeric Composites
dc.typeJournal Article
dc.journal.volume27
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/JCCOF2.CCENG-4138
dc.journal.fristpage04023051-1
dc.journal.lastpage04023051-17
dc.page17
dc.treeJournal of Composites for Construction:;2023:;Volume ( 027 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record