Show simple item record

dc.contributor.authorFangyue Luo
dc.contributor.authorGa Zhang
dc.contributor.authorChanghui Ma
dc.date.accessioned2023-11-27T23:01:34Z
dc.date.available2023-11-27T23:01:34Z
dc.date.issued9/1/2023 12:00:00 AM
dc.date.issued2023-09-01
dc.identifier.otherIJGNAI.GMENG-8737.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4293228
dc.description.abstractA group of well-designed centrifuge model tests were conducted to analyze the influence of drying–wetting cycles on the failure and deformation behavior of the slope. The full-field displacement was measured via the image correlation-based analysis and was used for the coupled analysis of the deformation and failure process. The drying–wetting cycles caused the slope to exhibit a shallower slip surface and lower safety limit. The drying–wetting cycles induced a remarkable progressive failure downward to the toe of the slope that was driven by the coupling development mechanism in the local failure and deformation localization of the slope. The slope deformation tended to localize in an area and then was aggravated, which led to the local failure there. The derived progressive failure mechanism highlighted the diversity in the slip surface and safety limit of slopes with the application of various water variation conditions. The drying–wetting cycles decreased the slope stability by aggravating the degree of deformation localization. The drying–wetting cycles induced significant deformation near the slope surface, where the direction of slope displacement exhibited a reversible change within a drying–wetting cycle and changed from vertical to horizontal as the elevation decreased. The drying–wetting cycle caused the soil to consolidate; therefore, the slope deformation that was due to the drying–wetting cycles decreased as the number of drying–wetting cycles increased.
dc.publisherASCE
dc.titleCentrifuge Modeling of Drying–Wetting Cycle Effect on Soil Slopes
dc.typeJournal Article
dc.journal.volume23
dc.journal.issue9
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/IJGNAI.GMENG-8737
dc.journal.fristpage04023157-1
dc.journal.lastpage04023157-11
dc.page11
dc.treeInternational Journal of Geomechanics:;2023:;Volume ( 023 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record