Show simple item record

dc.contributor.authorMajid Yazdandoust
dc.contributor.authorAmir Abbas Samee
dc.contributor.authorAbbas Ghalandarzadeh
dc.date.accessioned2023-08-16T19:07:39Z
dc.date.available2023-08-16T19:07:39Z
dc.date.issued2023/01/01
dc.identifier.other(ASCE)GM.1943-5622.0001826.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4292800
dc.description.abstractThis study attempts to evaluate the effects of two important structural design parameters on the dynamic behavior of back-to-back mechanically stabilized earth walls (BBMSEWs). For this purpose, a series of shake table tests were carried out on seven BBMSEW models with different overlap lengths of reinforcements (LR) and arrangements of connecting two opposing walls to each other. Based on the results of the particle image velocimetry (PIV), a combination of a concave surface and an inclined plane was observed as the failure surface in models and it was concluded that the complete connection of two opposing walls to each other could prevent the formation of a failure wedge in BBMSEWs. Findings indicated that although separating two opposing walls from each other and reducing the overlap LR increase lateral deformations, these could be two effective solutions for reducing the lateral earth pressure in BBMSEWs. On the other hand, comparisons have showed that Seed-Whitman and Mononobe-Okabe methods are conservative for calculating dynamic lateral pressures (σAE) in BBMSEWs at HPGA < 0.6g (where HPGA is horizontal peak ground acceleration) and that this conservatism fades gradually by increasing HPGA, and finally at HPGA ≥ 0.9g, the obtained values of σAE becomes almost greater than those predicted by these methods.
dc.publisherAmerican Society of Civil Engineers
dc.titleLateral Earth Pressure Distribution and Shear Band Development within Back-to-Back Mechanically Stabilized Earth Walls Under Seismic Conditions
dc.typeJournal Article
dc.journal.volume23
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0001826
dc.journal.fristpage04022267-1
dc.journal.lastpage04022267-18
dc.page18
dc.treeInternational Journal of Geomechanics:;2023:;Volume ( 023 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record