| dc.description.abstract | An analysis of the surface latent heat flux (SLHF) influence on the accumulated precipitation associated with an idealized extratropical cyclone using the Coupled Ocean–Atmosphere Mesoscale Prediction System is presented. There are two distinct precipitation regions found to be strongly influenced by the SLHF, referred to as the primary maximum and the cold-frontal precipitation. A substantial reduction by approximately 30 mm (35%) and 15 mm (75%) is observed in the accumulated precipitation of the two regions, respectively, when the SLHF is eliminated domain wide at 96 h—the starting time of the most rapid cyclone deepening. The source of this reduction is investigated by systematically controlling the SLHF in three cyclone sectors, which are the low-latitude, baroclinic, and high-latitude sectors. The precipitation in the primary maximum is most strongly controlled by the baroclinic sector, which experiences strong upward SLHF due to its dry environmental air. In contrast, the precipitation in the cold-frontal zone is most strongly controlled by the low-latitude sector, which experiences only a moderate amount of upward SLHF into the already warm and moist boundary layer air. The results underscore the crucial role of SLHF and boundary layer processes in precipitation predictions and demonstrate the need for accurate forecasts of air–sea temperature contrast, surface level winds, and moisture to properly simulate air–sea interactions. | |
