Show simple item record

dc.contributor.authorRongtao Yan
dc.contributor.authorMengqiu Yan
dc.contributor.authorHaihao Yu
dc.contributor.authorDehuan Yang
dc.date.accessioned2023-04-07T00:29:35Z
dc.date.available2023-04-07T00:29:35Z
dc.date.issued2022/11/01
dc.identifier.other%28ASCE%29GM.1943-5622.0002580.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4289133
dc.description.abstractGeomechanical behavior of methane hydrate-bearing sediment (MHBS) plays a major role in evaluation of the stability of a hydrate reservoir. A series of triaxial compression tests were conducted on MHBS to study the influence of temperature and pore pressure conditions on its mechanical behaviors. The experimental results show that temperature and pore pressure have a significant effect on the stress–strain curve, stiffness, and strength of MHBS. As temperature decreases and/or pore pressure increases, the stress–strain curve manifests an enhanced strain-softening characteristic, stiffness, and strength. Furthermore, MHBS cohesion also tends to exhibit a significant increase, but its internal friction angle almost remains constant with decreasing temperature and/or increasing pore pressure. These findings imply that the change in temperature and pore pressure affects the strength of MHBS, which occurs predominately due to change in its cohesiveness. To describe these impacts, a phase state parameter is introduced to characterize the temperature and pore pressure conditions. Meanwhile, three empirical formulas for relating the secant modulus, strength and cohesiveness to phase state parameter are presented. Good agreement between simulation and measured data indicates that the phase state parameter can effectively describe temperature and pore pressure conditions. The proposed empirical formulas are able to address the influences of temperature and pore pressure conditions on geomechanical characteristics of MHBS.
dc.publisherASCE
dc.titleInfluence of Temperature and Pore Pressure on Geomechanical Behavior of Methane Hydrate-Bearing Sand
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue11
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002580
dc.journal.fristpage04022201
dc.journal.lastpage04022201_13
dc.page13
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record