Show simple item record

dc.contributor.authorJung-goo Kang
dc.contributor.authorGyeong-o Kang
dc.date.accessioned2023-04-07T00:28:37Z
dc.date.available2023-04-07T00:28:37Z
dc.date.issued2022/12/01
dc.identifier.other%28ASCE%29GM.1943-5622.0002511.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4289099
dc.description.abstractAlthough belled piles have been widely applied to structures subjected to large horizontal loads, such as coastal structures, high chimneys, and transmission towers, their uplift capacity characteristics under various conditions have not been investigated in detail. In this study, model tests were performed in circular and half-circular chambers to determine the uplift capacity of belled piles in sandy ground under conditions such as relative density, penetration depth, and pile-tip inclination angle. Furthermore, image analysis was conducted by monitoring the model tests in a half-circular chamber to verify the shape of the failure surface. A semitheoretical model to predict the uplift capacity of belled piles in sandy ground was developed using the pile-tip failure angle and failure surface curve in accordance with the relative density, penetration depth, and pile-tip inclination angle based on the limit-equilibrium equation of a previous conventional pile. The values calculated using the proposed model were in good agreement with those obtained from experimental model tests.
dc.publisherASCE
dc.titleExperimental and Semitheoretical Analyses of Uplift Capacity of Belled Pile in Sand
dc.typeJournal Article
dc.journal.volume22
dc.journal.issue12
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0002511
dc.journal.fristpage04022217
dc.journal.lastpage04022217_15
dc.page15
dc.treeInternational Journal of Geomechanics:;2022:;Volume ( 022 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record